TEXTILE RUBBER OIL SEALS: Design TGU-GM
Profile with a special sealing lip to withstand higher pressures.
The TGU-GM type is a ring with a reinforced textile-rubber back, produced with a finger spring in stainless steel:
• The finger spring is vulcanized into the sealing lip.
• The assembly requires a clamping plate.
• By special request it can be produced in its “split” (open) shape. In this case, there should be no pressure in the application.
The minimum inside diameter that can be produced is 150 mm. For smaller dimensions, please contact us to verify production capacity.
PRESSURE: 0 BAR (0 MPa) “split” - 0.5 BAR (0.05 MPa) “endless”
SPEED: Up to 25 m/sec.
USE: Radial Sealing
OUTSIDE Ø: Textile-Rubber
CONSTRUCTION: Textile-Rubber back + Rubber + Sealing lip reinforced + Finger spring
|
Dimensions
|
Stocklist
|
|||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Search by |
|
|||||||||
| Order by | code | B | A | H | NBR | SIL | FKM | |||
| {[ value.codice | valueFormat:'codice' ]} | {[ value.B | valueFormat:'B' ]} | {[ value.A | valueFormat:'A' ]} | {[ value.H | valueFormat:'H' ]} | {[ value.NBR | valueFormat:'NBR' ]} | {[ value.SIL | valueFormat:'SIL' ]} | {[ value.FKM | valueFormat:'FKM' ]} | ||||
dimensions on request
